I was running RC2 with this happening, rolled back to RC1 with same results. Both boxes were checked as I stated on both sides of contact, but both stations still appeared in normal FT8.
Have now gone back to 1.9.1 to avoid any more unhappy attempted contacts. I have noticed that this double sending does NOT occur with all users, just a select few. Not at all negative, but just stating what happened. Will use each and every new RC and follow the progress and check to see if it's still happening to me at least. Overall, I like all the features added to the RC's and know they will be up to the level you have always attained by the GA release. 73's On Wed, Sep 26, 2018 at 12:34 PM Joe Taylor <j...@princeton.edu> wrote: > George -- > > On 9/26/2018 11:31 AM, WB5JJJ wrote: > > I'm using RC1 again now, but this also happened when I was running RC2 > > since it was released. > > Why -rc1 ??? The whole point of beta releases is to test and exercise > new code. Please use the latest release when helping us in this way. > > > Some stations are appearing on the .078 frequencies in both normal and > > 77bit mode simultaneously even though both boxes are checked on their > > end. I've run tests with a local and with him CQing in 77b and me > > checking 77b, he's there and then I go to normal and he's also there. > > > > What prompted this check was I was calling CQ in 77b (both boxes checked > > and verified) and he texted me saying that several Europeans were > > responding to my CQ's. I saw nothing from them in 77b. Went to normal > > (both boxes unchecked) and they were indeed responding to me. > > > > Seems the "Always generate 77-bit messages" is actually sending both > > formats. How can this be? > > Seems clear to me. You had "Decode only 77-bit messages" checked. The > station(s) calling you were sending basic messages in "Call_1 Call_2 > Grid" or "Call_1 Call_2 Report" format; these are OK in either protocol. > Evidently had NOT checked "Always generate 77-bit messages", so the > messages were sent in the (default) old format. > > Probably your callers had not read the Quick-Start Guide to WSJT-X 2.0. > Possibly a language issue. > > -- 73, Joe, K1JT > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
