Sorry. Trying to give it a good test. I got fooled because I worked several others FH with that version ok.
On Tue, Oct 23, 2018 at 9:16 AM WB5JJJ <wb5...@gmail.com> wrote: > As stated by Joe Taylor, RC3 is NOT designed for DXP until the full > release. It uses 77 bit and none of the DXP are using that mode since it > is still in beta. VP6D specifically stated NOT to use RC3 and use v1.9.1 > for this exact reason. > > On Tue, Oct 23, 2018 at 4:39 AM David Spoelstra <dav...@mediamachine.com> > wrote: > >> Ubuntu 18.10 >> WSJT-X V2.0.0-rc3 >> >> In normal mode everything decodes ok. Switch to FH mode and there is no >> decode even though waterfall shows strong signals. Switch back to normal >> mode and everything decodes. >> >> Switch back to 1.9.1 and both modes decode ok. >> >> Switch back to rc3 and same decode problem in FH mode. >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > > > -- > George Cotton, WB5JJJ > PO Box 1025 > Russellville, AR 72811 > > 479.968.7737 <(479)%20968-7737> Home > 479.857.7737 <(479)%20857-7737> Cell > > DMR K5CS (Local Repeater) - 310515, CC1, TS2 > DMR Arkansas - 3105 > > 4 > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
