Similar (rc3 on Win) problem just occurred with me. Using Tab 1 messages, had “CQ DX” set in the “free” message selection. Double clicked a return caller’s line in Rx Freq pane. The message stayed on the “free” message and continued to transmit the “CQ DX” even though I tried double clicking on him in Band activity pane and on his JTAlert bubble. Return caller’s callsign also did not enter in the message or DX call boxes. Had to “halt” the tx, input the return caller’s callsign in Dx Call, generate messages, click message 2 and enable Tx to get the proper response going - unfortunately, not in time to get the QSO.
I have also had a few times (with band pretty busy) that the program did not auto answer/respond to a correctly decoded return-after-cq, but did then start auto-sequencing correctly after double clicking on the return call. Appears there is an auto sequence problem associated with the “free” message that did not seem to be in previous versions and, maybe, when the decoder is really busy. Al Pawlowski, K6AVP Los Osos, CA USA > On Nov 1, 2018, at 00:23, wsjt-devel-requ...@lists.sourceforge.net wrote: > > From: Dave Boniface <m0hjs.i...@gmail.com <mailto:m0hjs.i...@gmail.com>> > To: wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Subject: Re: [wsjt-devel] WSJTX 2.0.0 _ rc3 > > Hi Folks. > > Looking at my e-mails from the group, you have a few issues ... > > Anyway, I've not noticed anything that looks like my problem, being > reported. Although, I have not read *ALL *the submissions. > > I'm using FT8 and the 2nd option for the generated messages. I have not > tried any of the other modes with this rc version, yet. > > > *No. 1.* > > ON RX, the software receives and decodes callsigns etc., OK. > > If I double click on a received call (*station calling CQ*), then it > appears in the logging area, i.e. displays Call, Locator, AZ, and > distance. BUT does not load anything into the generated messages box. > This remains blank. > > However, when the software starts the TX sequence the software starts to > send a "CQ" message on the frequency of the station I am trying to call. > > *No. 2.* > > If I decide to call CQ, this appears to function OK. > > However, when called, and having selected the station, (*either manually or > via the 1st call option*) the software does not respond to being called, it > just continues to send CQ, in the appropriate time slot.
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
