FWIW .. there is NO need to have CQ DX in the 'free text area' as you
can add that to the standard CQ message by just typing it in and letting
the system work as designed.
Neil, KN3ILZ
On 11/1/2018 12:29 PM, Al Pawlowski wrote:
Similar (rc3 on Win) problem just occurred with me. Using Tab 1
messages, had “CQ DX” set in the “free” message selection. Double
clicked a return caller’s line in Rx Freq pane. The message stayed on
the “free” message and continued to transmit the “CQ DX” even though I
tried double clicking on him in Band activity pane and on his JTAlert
bubble. Return caller’s callsign also did not enter in the message or
DX call boxes. Had to “halt” the tx, input the return caller’s
callsign in Dx Call, generate messages, click message 2 and enable Tx
to get the proper response going - unfortunately, not in time to get
the QSO.
I have also had a few times (with band pretty busy) that the program
did not auto answer/respond to a correctly decoded return-after-cq,
but did then start auto-sequencing correctly after double clicking on
the return call.
Appears there is an auto sequence problem associated with the “free”
message that did not seem to be in previous versions and, maybe, when
the decoder is really busy.
Al Pawlowski, K6AVP
Los Osos, CA USA
On Nov 1, 2018, at 00:23, wsjt-devel-requ...@lists.sourceforge.net
<mailto:wsjt-devel-requ...@lists.sourceforge.net> wrote:
From: Dave Boniface <m0hjs.i...@gmail.com <mailto:m0hjs.i...@gmail.com>>
To:wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] WSJTX 2.0.0 _ rc3
Hi Folks.
Looking at my e-mails from the group, you have a few issues ...
Anyway, I've not noticed anything that looks like my problem, being
reported. Although, I have not read *ALL *the submissions.
I'm using FT8 and the 2nd option for the generated messages. I have not
tried any of the other modes with this rc version, yet.
*No. 1.*
ON RX, the software receives and decodes callsigns etc., OK.
If I double click on a received call (*station calling CQ*), then it
appears in the logging area, i.e. displays Call, Locator, AZ, and
distance. BUT does not load anything into the generated messages box.
This remains blank.
However, when the software starts the TX sequence the software starts to
send a "CQ" message on the frequency of the station I am trying to call.
*No. 2.*
If I decide to call CQ, this appears to function OK.
However, when called, and having selected the station, (*either
manually or
via the 1st call option*) the software does not respond to being
called, it
just continues to send CQ, in the appropriate time slot.
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
