I guess you were using the FTDX5000 rig entry?
Can you repeat this problem? I do notice that VFOB mode does not get set until
you transmit.So if you make the mode on VFOB LSB and start WSJT-X it will stay
LSB until you transit.But, when you transmit it should change VFOB's mode to
USB if you have USB selected in WSJT-X's rig setup.
de Mike W9MDB
On Saturday, November 3, 2018, 8:13:04 AM CDT, Tom Ramberg via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hi. I just returned from my recent mini expedition as JW6VDA. During the stay
I mainly used version 1.9.1, and used a FTdx3000, CAT control set to RIG.
Because I also did some SSB split on 40 meters, VFO B was set to LSB, and was
left there. Going back to FT8, it took me two days (sic) to realise that
WSJT-X did not force VFO B to go to USB. As a result, I was transmitting LSB
and made no contacts until I realised the problem. Operator error, of course.
Using FAKE IT was no problem. I have not checked it out on version 2.0 RC#, but
if it is an issue there too, it might be considered to force also VFO B to USB
when checking RIG.
73 de Tom OH6VDA / JW6VDA
Sendt fra min iPad Air 2_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
