Hi All. Want to report some problems. Maybe they have been reported before but it takes too long to go through all the messages on this forum. I’m running RC3 on a windows 10 system. 1. I’m on MSK144 and have FTOL set to 200. I go to JT65 and set FTOL to 50. I return to MSK144 and FTOL there is now at 50. It took me quite a while to discover why I was not decoding pings on MSK144…
2. On both of the above modes the SH and Auto Sequence checkboxes keep getting unchecked. This is particularly true in JT65 mode, but it happens in MSK as well. They get unchecked while using the program (don’t have a tested scenario), and they sometimes do not stay checked after a restart. 3. In JT65 mode the auto sequencing does not work right. For example, when a station answers by sending calls and an OOO report, the next sequence for me would be to send just RO (when SH is checked). But the program starts sending calls and OOO report instead. Then when advancing from RO to 73, it just continues sending RO. 4. Periodically WSJT-X stops receiving. Everything seems to work, and the noise level is still there, but the waterfall or graph does not advance, and no signals are found. The program must be restarted to get it working again. This has been happening even with 1.9 and 1.8 versions, and on multiple computers. (I would guess that one of the program threads is dying.) 5. Sometimes, in JT65 (and maybe in MSK144), the ability to double click on a received call and have the messages auto generate stops working. Hope this helps, 73 – Russ K2TXB
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
