Hi Russ,
On 11/8/2018 7:59 PM, Russ wrote:
Hi All. Want to report some problems.Maybe they have been reported
before but it takes too long to go through all the messages on this forum.
I’m running RC3 on a windows 10 system.
1. I’m on MSK144 and have FTOL set to 200.I go to JT65 and set FTOL to
50.I return to MSK144 and FTOL there is now at 50.It took me quite a
while to discover why I was not decoding pings on MSK144…
WSJT-X faithfully remembers user settings on program exit and restart.
For many reasons it does not guarantee doing so after a mode switch
followed by return to the original mode.
If you want such behavior, use the Configuration menu. Make separate
Configurations for MSK144 and JT65, set up the way you like, and then
switch modes by switching Configurations.
2. On both of the above modes the SH and Auto Sequence checkboxes keep
getting unchecked.This is particularly true in JT65 mode, but it
happens in MSK as well.They get unchecked while using the program
(don’t have a tested scenario), and they sometimes do not stay
checked after a restart.
I have not seen such behavior, and have not received any similar
reports. Please document a situation in which an unexpected change
occurs for you.
3. In JT65 mode the auto sequencing does not work right.For example,
when a station answers by sending calls and an OOO report, the next
sequence for me would be to send just RO (when SH is checked).But
the program starts sending calls and OOO report instead.Then when
advancing from RO to 73, it just continues sending RO.
Auto-sequencing is designed for the 15-second modes FT8 and MSK144.
It's normally quite necessary for 60-second modes like JT65. However,
as a favor to some microwave EME Ops we tentatively activated it for use
when they are kept very busy with antenna pointing, etc. They don't
normally use Sh messages, and I do not think we have ever tested
auto-sequencing in JT65 with Sh messages. If you think it's important,
we could look into it.
4. Periodically WSJT-X stops receiving.Everything seems to work, and
the noise level is still there, but the waterfall or graph does not
advance, and no signals are found.The program must be restarted to
get it working again.This has been happening even with 1.9 and 1.8
versions, and on multiple computers.(I would guess that one of the
program threads is dying.)
This does not sound like a WSJT-X issue. ???
5. Sometimes, in JT65 (and maybe in MSK144), the ability to double
click on a received call and have the messages auto generate stops
working.
Please provide example(s).
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
