Hi Edfel,
Special Op. / ARRL RTTY was checked right from the start. Don’t know what the problem is. 73s de Andy, oe3dmb Von: Edfel Rivera [mailto:[email protected]] Gesendet: Samstag, 01. Dezember 2018 20:54 An: WSJT software development Betreff: Re: [wsjt-devel] not decoding ru Hi Andreas: I worked yesterday night various stations, 7080, be sure to set in Advance Special Op and ARRL RTTY. Right now on 20m 14130 many RC4 -5 Stations and decodind! 73' Edfel KP4AJ On Sat, Dec 1, 2018 at 2:51 PM Andreas Ma <[email protected]> wrote: Hi David and all Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here) having plenty of signals in the waterfall display, but very few decodes. Changing back to V1.9.1 no decode at all (as expected). Changing to 7074 getting dozens of decodes per time slot. Clocks are accurate. Tried this on two different Laptop Computers with Win7 and Win10 and of course with V2-rc5. Both the same result. I even cannot decode my own signal from one computer to the other one, however no problem to decode my own signal with V1.9.1. 73s de Andy, oe3dmb Von: David Pickard [mailto:[email protected]] Gesendet: Samstag, 01. Dezember 2018 20:07 An: [email protected] Betreff: [wsjt-devel] not decoding ru I have v2-rc5 installed. Worked several stations yesterday on FT8. I am currently on 14.130 and hear lots of FT8 signals and see them on the waterfall but am showing very few decodes. I moved up 2khz and heard lots of signals but no decodes. -- David NM5Z _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
