Andy,
the starting freq for 40m was 7.080 .. it was very busy here in PA.
Neil, KN3ILZ
On 12/1/2018 2:46 PM, Andreas Ma wrote:
Hi David and all
Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here)
having plenty of signals in the waterfall display, but very few
decodes. Changing back to V1.9.1 no decode at all (as expected).
Changing to 7074 getting dozens of decodes per time slot. Clocks are
accurate.
Tried this on two different Laptop Computers with Win7 and Win10 and
of course with V2-rc5. Both the same result. I even cannot decode my
own signal from one computer to the other one, however no problem to
decode my own signal with V1.9.1.
73s de Andy, oe3dmb
*Von:*David Pickard [mailto:[email protected]]
*Gesendet:* Samstag, 01. Dezember 2018 20:07
*An:* [email protected]
*Betreff:* [wsjt-devel] not decoding ru
I have v2-rc5 installed. Worked several stations yesterday on FT8. I
am currently on 14.130 and hear lots of FT8 signals and see them on
the waterfall but am showing very few decodes. I moved up 2khz and
heard lots of signals but no decodes.
--
*David NM5Z*
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
