Dear Steve, In my case I had Dimension 4 running keeping my clock in my computer very close to the correct time. Is there something better I could have used? Or is it just a fluke from the other stations I was calling? Or is it the bug that was killing me and why were others making contacts all the time and I was being kept out for some other reason that I need to fix?
Thanks for your help. 73 Dave Hassall WA5DJJ Las Cruces, New Mexico Website: http://www.zianet.com/dhassall/ QRSS SUPER GRABBER WEBSITE: http://www.qsl.net/wa5djj/ -----Original Message----- From: Steven Franke via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] Sent: Monday, December 03, 2018 2:12 PM To: WSJT software development <wsjt-devel@lists.sourceforge.net> Cc: Steven Franke <s.j.fra...@icloud.com> Subject: Re: [wsjt-devel] Very few decodes during contest Andy, Thank you for sending wav files! This morning I identified and fixed a bug that probably explains the symptoms that you have described. The bug was causing signals with negative DT to fail to decode. This bug may explain why some users observe that decoding seems to stop working after a period. If the computer's clock drifts such that DT's are shifted toward negative values, then that could have prevented signals from decoding. This should now be fixed, and the corrected code will be in the GA release. Here are the decodes that I get from the 193215 Saturday evening after fixing the bug: 193215 -15 -0.1 748 ~ CQ RU YC2YIZ OI52 Indonesia 193215 -16 -0.2 912 ~ ES4NY SV8EUB 539 0024 193215 -1 0.0 1035 ~ OH4NDU RX4HX 559 0036 193215 5 -0.3 1312 ~ OZ6GH EA3KU R 569 0017 193215 0 -1.0 1457 ~ IK2RZP SA3MYS 539 0002 193215 7 -0.1 1712 ~ G8AJM UA3ROB 539 0016 193215 -15 -0.3 1874 ~ HA8TKS ON4HRT R 549 0024 193215 -12 -0.3 1966 ~ PD2EMP UR7HN 529 0004 193215 -2 -0.3 2043 ~ ES4NY RX6ACJ 549 0024 193215 -17 -0.6 2194 ~ PD2EMP RA3TT 549 0010 193215 -6 0.1 2264 ~ UR3QTN EA2ASB 539 0003 193215 -19 -0.6 782 ~ OH8WW M0IEP 579 0009 193215 -12 -0.1 1015 ~ CQ RU R3QG KO91 EU Russia 193215 -8 -0.4 2040 ~ ES4NY RC7LS 569 0033 You’ll notice that most of these decodes show negative DT, which explains why they weren’t decoding before. Steve k9an > On Dec 3, 2018, at 2:41 PM, Andi Malek <m_a...@gmx.net> wrote: > > Hi Dave, > > I’ve got exactly the same problem but it seems that this thing happens on > very very few Systems. Unfortunately I’ve encountered the Problem on two > different Computers with two different receivers on Saturday evening. I > wasn’t even able to receive my own Signal transmitted by one rig to the other > one and no receive the other way round either. Switching back to V1.9.1 > brought perfect reception on both systems and both rigs were receiving the > signal of the other one. > > Like a Miracle one of the two Systems started to operate just fine Sunday > evening. So I was able to decode practically all readable transmissions > during the test. I’ve attached two .wav files saved by the two different > systems. One caught on Saturday evening, where just a few transmissions can > be decoded, the second one caught Sunday evening with a lot of decoded > transmissions. I’m even able to decode the ‘good’ wave-file on the system > that is not decoding well from RF with very good results. > > This evening I gave it another try with both rigs operating on 10m, where I > was the only one on the band. With V1.9.1 both directions worked fine. With > V2.0.0 RC5 only one direction worked, as yesterday. > > The two systems are: > Good working one: Old Lenovo laptop computer with built in sound card running > on Win7. > The deaf one: Toshiba laptop computer connected to the radio via Signalink > USB modem running on Win10. > > I made all settings exactly the same on both systems. Tomorrow I will try to > feed the same audio to both systems and give it a try. Hopefully the .wav > Files are useful to the developement team who is doing a great job! > > 73s de Andy, oe3dmb > > > Von: Dave Barr > Gesendet: Montag, 3. Dezember 2018 19:02 > An: wsjt-devel@lists.sourceforge.net > Betreff: Re: [wsjt-devel] Very few decodes during contest > > Thanks for all the replies but almost everyone missed the point. It > was my receiving with which I was having a problem. My 5 watt signal > was heard as well as would be expected. My problem is that there are > say ten signals showing clearly on the waterfall, I was able to decode only > 2 or 3. I did not have the CQ only box checked. I was in the correct > band, ie, 7080 khz for 40 meters (problem occurred on all bands). The > signals that did decode were at a variety of strengths, +7 to -20. > Software is RC5. After the contest ended, I reloaded 1.9, and there > were decodes for almost all signals at the regular QRGs. > > Did anyone experienced this situation? Remember, receive decodes only > and only with 2.0 rc 5 and rc 4. > > Dave, K2YG > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > <181202_203100.wav><181201_193215.wav>________________________________ > _______________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
