Ron,
See below
On 12/11/2018 10:26 PM, R SCHMAHL wrote:
The fix for the LotW error: Does that have to be done before you
download Ver 2.0 or can it be done after download? I upgraded to
ver2.0 and ignored all warnings and pronouncements and it worked fine.
I turned on Monitor and was shocked how many decodes there were (80m).
Every CQ I answered someone came back. I called CQ and there were many
replys. Maybe I am imagining things but my FT8 success rate seems to
be higher then normal. Maybe everyone who upgraded is anxious to try
Ver2 out as much as possible because it is new?
You can do it anytime you like ... just click OK on the pop up
window. The permanent fix as listed in the User Manua l will
eliminate that.
I use DX keeper for logging ( I input the data manually) and it
uploads to LotW ok.) Am I missing something here? Is there and
automatic way to get data into DX Keeper that gets screwed up if you
don't download the fix? I am little shy about adding this extra file
to my system for fear it will break something else.
The fix has nothing to do with logging to DXKeeper, its a .DLL that
fixes a internet security requirement that the ARRL has. As far as
automatically getting data to DXKeeper from WSJT-X, you should look at
JT-Alert. The setup info can be found here:
http://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModes
I am always perplexed about different operating styles with FT8. Some
only reply with signal reports. Some use auto sequence, some don't
answer with my report until the 3rd time or never. What gives?
People try to save 15 seconds ... think that they can work faster
running "manually" than with auto-seqeunce, and so on. As far as
answering you, sometimes if you're running simplex, other stations are
calling and you're not being decoded.
Hope this helps,
Neil, KN3ILZ
Thanks-Great job Team
.
Ron K2PSD
On Tue, Dec 11, 2018 at 02:53 PM, Joe Taylor wrote:
On 12/11/2018 2:25 PM, Greg Gilbert KN4APC wrote:
What is the fix for this?
Thanks,
Greg KN4APC
New Year's Resolution:
"Before posting a question on setup or usage of WSJT-X I will check
the WSJT-X 2.0 User Guide and look for similar queries on the same
reflector."
In this particular case, an installation problem under Windows, try
looking at Section 3.1, "Installation: Windows":
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.0.0.html#INSTALL
--Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
