Hi Neil,
On 12/11/2018 11:46 PM, Neil Zampella KN3ILZ wrote:
I was calling CQ with the Hold Tx Freq set. I has just finished an QSO
with a station, and someone replied to a CQ call a minute later. The
Auto Sequence kicked in fine, and the QSO was completed properly.
However, when I looked back on the exchange in the Rx Frequency window,
I noticed that I was getting decodes in that window from my previous QSO
partner.
Looking at the waterfall, I saw that the Rx Green Bracket had not moved
to the new QSO partner's frequency, but stayed with the old one. I have
an attachment, not sure which is better keep the screen cap as an
attachment or as an inline picture.
Looks perfectly normal to me. The "Rx Frequency" window gets anything
decoded within a few Hz of Rx Freq and anything containing your own
call. The green goal posts did not move to your new QSO partner's
frequency because you did not double-click on his call to start the QSO.
You had "Call 1st" enabled, so the QSO started automatically when he
replied to your CQ.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
