Hi Joe,
thanks ... didn't think I had seen that happen before :(
Neil, KN3ILZ
On 12/12/2018 8:22 AM, Joe Taylor wrote:
Hi Neil,
On 12/11/2018 11:46 PM, Neil Zampella KN3ILZ wrote:
I was calling CQ with the Hold Tx Freq set. I has just finished an
QSO with a station, and someone replied to a CQ call a minute later.
The Auto Sequence kicked in fine, and the QSO was completed properly.
However, when I looked back on the exchange in the Rx Frequency
window, I noticed that I was getting decodes in that window from my
previous QSO partner.
Looking at the waterfall, I saw that the Rx Green Bracket had not
moved to the new QSO partner's frequency, but stayed with the old
one. I have an attachment, not sure which is better keep the screen
cap as an attachment or as an inline picture.
Looks perfectly normal to me. The "Rx Frequency" window gets anything
decoded within a few Hz of Rx Freq and anything containing your own
call. The green goal posts did not move to your new QSO partner's
frequency because you did not double-click on his call to start the
QSO. You had "Call 1st" enabled, so the QSO started automatically
when he replied to your CQ.
-- 73, Joe, K1JT
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
