I often experience the same thing. If wsjt-x runs for awhile (about an hour or so), it no longer transmits. Both the enable transmit button and the tune button have no effect. It probably has something to do with how the program interacts with Windows. Closing and restarting the program fixes it.
73, Frank, KF6E On Mon, Dec 31, 2018, 23:49 Richard Solomon <w1...@outlook.com wrote: > I know I have very little data to go on, but on a few occasions > I have had the Tune button not work. Re-starting FT8 cures > the problem. > > Just recently, I was monitoring 160 for about an hour and > decided to look at the SWR on the Antenna. > > I put the SPE-1.3K in Stand-by and hit the Tune button, That > usually results in keying the rig and tickling the Antenna with > about 35 Watts. > > Normally this works, but, now being the third time this anomaly > has occurred, this time nothing. Usually, when I first turn everything > on, I check the antennas, so I really don't keep track of every action > after that. > > I know this is not much to go on, but I thought I would mention it, > just in case someone else is experiencing this. > > 73 es HNY, Dick, W1KSZ > > Sent from Outlook <http://aka.ms/weboutlook> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
