Hi,
Same problem exist, Yaesu FT757GX CAT unidirectional too. Offical version of WSJT-X not working properly with this radio. But some patch available in this forum. But not user friendly. I think the best way the offical support this radio too. I don't have this type of radio, but a friend of mine does. Lajos HA8HL 2019-02-23 13:10 időpontban phumphr...@columbus.rr.com ezt írta: > Hi Shane, > Michael worked with me and he made a fix for the FT-847. I am currently > running release test 25. I would imagine it would be in the next release. You > will have to select Yaesu FT-847UNI. Also, depending on your interface, you > will have to key the radio using the RTS if you are using the rear data jack. > The CAT command will only use the front microphone jack. I have used this > configuration for a few months and it works for all modes. Since the > communications is one way, if you change from USB to CW, you must change it > back manually. I can tell you that it is a lot of fun making 400+ mile > contacts on VHF and UHF. Also since you said that you have two radios, you > can run a 2nd instance in a command line prompt. This is what I use: > > C:WSJTwsjtxbinwsjtx.exe --rig-name=FT847uni > > I hope this helps you out. I can email you the release I am using, but maybe > Michael an recommend a later release. > > Phil > > ARS N8LRG > > ---- Shane Stroud <shanestroud1...@hotmail.com> wrote: > >> I don't want to confuse anybody, so I'll say up front that I have an >> FT-747GX and two FT-847 rigs. The 747 is a whole other issue, in a message I >> just sent. I have an early production FT-847 that has unidirectional CAT, >> and a later production model that has bidirectional CAT. I know we had >> started a discussion on this issue an I think it got mixed up with the >> FT-840, then died out. At present, the early FT-847s cannot use wsjt-x >> because the software doesn't understand that early models had unidirectional >> CAT. The software sets the frequency and mode, but the rig cannot >> acknowledge that change. It sets the parameters, but never reports back to >> the software that it's done. Basically, I'm asking if that being worked on >> in any way. I haven't heard anything on it in a while. Do we need a guinea >> pig? I'm willing to test software (Linux only, as that's all I have) on >> either FT-847 to make sure it all works. L. Shane Stroud AE5SS > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] ------------------------- c2.hu [2] ingyenes webmail - 10GB tárhely, megújult külsővel! Links: ------ [1] https://lists.sourceforge.net/lists/listinfo/wsjt-devel [2] http://www.c2.hu/
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
