Colleagues mode FT4/FT8! Have you noticed an increase in the number of repeats information in FT4? Comparing with the FT8, is this duplication of information tiresome or not noticeable with increased attention? At FT8, there was no such stress !?
30 апреля 2019, 11:43:18, от "K2DBK-WSJT" <k2dbk+w...@k2dbk.com>: I saw a mention of this on the announcement thread but figured I’d start a new one: Using FT4, after a few CQs the rig will change to another FT-4 frequency. Sometimes it’s after a single CQ, sometimes 2 or 3, but I can’t figure out any specific pattern. It just jumped from 80 to 15 (2 CQs) to 20 (1 CQ) to 30 (1 CQ) to 80 (1 CQ) and for whatever reason it’s now staying on 80. (Well, it was, it went to 17 after about 15 CQs). I played around for a bit and there doesn’t seem to be any discernable pattern. When it switches, I can see what looks like a flicker on the band selection dropdown when this happens, so I think it’s something related to the controls, and not an issue with my rig interface. I have no issues on FT8. I dropped the power to just above zero (so low that I couldn’t hear anything with the rig monitor on), and still had the issue, so I don’t think it’s RF-related. I switched back to FT-8 after these issues and other than resetting the audio input level (I’m running the 64-bit version), I didn’t make any other adjustments. (I have a separate FT-4 configuration but other than just having it populated with FT-4 frequencies it’s identical to my default FT-8 configuration. I’m using an Icom 7600 and haven’t had any issue with rig control errors at all, either in WSJT-X or elsewhere. What can I do to help troubleshoot? -- 73, David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com twitter: @k2dbk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Good Luck! Best DX's! 73! de Sergio fm Kharkov BYE-Poka!
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
