Check your Windows 10 updates first. I had the same issue. Now, no problem.
73 de W8NET Miles / “Gene” Secretary, Portage County Amateur Radio Service (PCARS) 3905 Century Club - Master #47 DV2/W8NET in the Philippines Licensed since 1974 > On Jun 15, 2019, at 6:41 PM, Tom M0LTE <t...@m0lte.uk> wrote: > > This happens to me from time to time. > >> On Sat, 15 Jun 2019 at 22:43, Steve Masticola via wsjt-devel >> <wsjt-devel@lists.sourceforge.net> wrote: >> Program version: 2.0.1 7ddcb7 >> >> Operating system: Windows 10, ver. 1809 (OS Build 17763.503) >> >> Description: After sitting idle with Monitor on for several minutes, WSJT-X >> will key the transceiver on Tune or transmit, but does not generate sound to >> the soundcard. I have confirmed that the issue is in WSJT-X, not Windows or >> the soundcard. Confirmation was by testing the soundcard with the Windows >> Speaker Properties popup to eliminate Windows or the soundcard as the cause. >> 100% reproducible for users who are seeing this. Have identified a small >> number of other users who are affected. Can obtain additional logs if >> helpful. Please advise. >> >> Sequence of steps to repeat: >> >> Note: Only a small number of users reproduce this AFAICT. >> >> 1. Disable Windows screen saver and all USB power-saving options. >> 2. Start WSJT-X. >> 3. Confirm proper operation of Tune control. >> 4. Let WSJT-X idle for 10-30 minutes. >> 5. Key the Tune control. Rig will be placed in transmit mode but no audio >> will go to the soundcard. >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel