I had the same issue before. Check your Windows 10 sound “USB Mic Codec” level. 
 And, in your 7300 mod level needs to be 35-50% or less. 

73 de W8NET Miles / “Gene”
Secretary, Portage County Amateur Radio Service (PCARS)
3905 Century Club - Master #47
DV2/W8NET in the Philippines
Licensed since 1974

> On Aug 19, 2019, at 1:03 PM, Black Michael via wsjt-devel 
> <wsjt-devel@lists.sourceforge.net> wrote:
> 
> Look at the audio mixer control and adjust the audio level there for WSJT-X.
> 
> What I'm not sure of is if this is a Windows 10 update that caused it or a Qt 
> library change.
> I think Bill has mentioned it's a recent Windows 10 update that put the mixer 
> in the path now.
> 
> Does the 32-bit version cause the same problem?  That's an older version of 
> Qt.
> 
> de Mike W9MDB
> 
> 
> 
> 
> On Monday, August 19, 2019, 11:54:58 AM CDT, Christopher Diederich via 
> wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
> 
> 
> Hello,
> 
> First - regret sending from an e-mail address that is different from my 
> registered account. 
>  
> After upgrading to the subject version of the software, I noticed that my 
> output power levels were very low. With my IC-7300 power maxed and the power 
> slider on the program maxed, I can only get 50 watts output. 
>  
> I use JTAlert-X v2.14.1 in conjunction with WSJT-X. I am using Win 10 Pro for 
> my OS. 
>  
> Once I increased my USB modulation on my IC7300, I was able to increase my 
> power out. 
>  
> There is not specific sequence that results in the issue. It’s merely a power 
> out issue. The only thing that changed was the version of WSJT-X.
> 
> I have the latest firmware/software on my IC7300. I connect via USB cable 
> from the rear of the radio to my computer. All other digital mode programs 
> function normally. 
>  
> There is another local Ham who is experiencing the same issue.
>  
> Thank you.
> 
> 73
> de K1LDO
> Chris Diederich
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to