These are all great suggestions. Also, check the "pwr" slider at the lower right corner of the WSJT-X window. Be careful with this, checking up on your ALC level on the radio to ensure you're not distorting your signal. My IC-7100 runs optimally between 2 and 4 notches on this slider.
On Mon, Aug 19, 2019 at 10:13 AM Gene Marsh via wsjt-devel < [email protected]> wrote: > I had the same issue before. Check your Windows 10 sound “USB Mic Codec” > level. And, in your 7300 mod level needs to be 35-50% or less. > > 73 de W8NET Miles / “Gene” > Secretary, Portage County Amateur Radio Service (PCARS) > 3905 Century Club - Master #47 > DV2/W8NET in the Philippines > Licensed since 1974 > > On Aug 19, 2019, at 1:03 PM, Black Michael via wsjt-devel < > [email protected]> wrote: > > Look at the audio mixer control and adjust the audio level there for > WSJT-X. > > What I'm not sure of is if this is a Windows 10 update that caused it or a > Qt library change. > I think Bill has mentioned it's a recent Windows 10 update that put the > mixer in the path now. > > Does the 32-bit version cause the same problem? That's an older version > of Qt. > > de Mike W9MDB > > > > > On Monday, August 19, 2019, 11:54:58 AM CDT, Christopher Diederich via > wsjt-devel <[email protected]> wrote: > > > Hello, > > First - regret sending from an e-mail address that is different from my > registered account. > > After upgrading to the subject version of the software, I noticed that my > output power levels were very low. With my IC-7300 power maxed and the > power slider on the program maxed, I can only get 50 watts output. > > I use JTAlert-X v2.14.1 in conjunction with WSJT-X. I am using Win 10 Pro > for my OS. > > Once I increased my USB modulation on my IC7300, I was able to increase my > power out. > > There is not specific sequence that results in the issue. It’s merely a > power out issue. The only thing that changed was the version of WSJT-X. > > I have the latest firmware/software on my IC7300. I connect via USB cable > from the rear of the radio to my computer. All other digital mode programs > function normally. > > There is another local Ham who is experiencing the same issue. > > Thank you. > > 73 > de K1LDO > Chris Diederich > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
