The thing that drives me crazy it that it seems that everytime I turn everything on, the USB inputs and outputs have changed names. At least for the Audio, you can take care of this by opening Audio MIDI Setup and reagent aggregate Devices. I made an IC7300 out and in and a IC9700 Out and In. You can do this by only connecting one radio at a time, so it is easier to tell which one you are working with. Once it is set up, it is easy to make sure that you are connecting the correct Audio to the software.
Allan N7RP > On Feb 12, 2020, at 7:50 AM, Steven Nash <stevengn...@gmail.com> wrote: > > Hi, > > I have both the Icom IC-7300 and IC-9700 working with MacLoggerDX on MacOS > 10.14, providing both rigs are not connected via USB at the same time. > > When both are connected at the same time then WSJT-X always tries to > send/receive via the 7300 (even if the 7300 is switched off and 9700 is on). > Changing audio device for input/output in WSJT-X makes no difference. Rig > operation via MacLoggerDX controls the correctly selected rig in MacLoggerDX. > It is only USB audio that is the issue. > > 73 > Steve G0UQT > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
