OK. I figured out my mistake with following the video.
When I run the rigctl-wsjtx.exe, and I try to test with F to get
frequency I get the get_freq: error = Invalid Parmeter.
On 6/2/2020 1:45 PM, Kim gross wrote:
Thanks for the help Mike
For my setup com3 is primary port, and com is the secondary.
I am trying to follow the directions but when I run the rigcrtl -m
1035 -r com3 -R com -s 38400 it never comes back. If I don't do both
-r and -R I get an error. If I set both -r and -R to come3, it drops
back to a command prompt. I also switched the -r and -R to see if it
made a difference and it still hangs.
Kim Gross
On 6/2/2020 1:20 PM, Black Michael via wsjt-devel wrote:
I need one of the Yaesu owners to follow the directions in this
youtube video and send me their debug.txt file.
https://www.youtube.com/watch?v=0yZG1-v-BXA
Mike W9MDB
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
