Dear Devel List, I actually face an issue with the most recent version of WSJT-X;
WSJT-X are set to use an Yaesu FT-991; But at each band change with CAT it keep calling an non existant file : user_hardware + band value. I've read this on the WSJT-X doc : "Depending on your station and antenna setup, band changes might require other switching besides retuning your radio. To make this possible in an automated way, whenever WSJT-X executes a successful band-change command to a CAT-controlled radio, it looks for a file named user_hardware.bat, user_hardware.cmd, user_hardware.exe, or user_hardware in the working directory. If one of these is found, WSJT-X tries to execute the command user_hardware nnn In the above command nnn is the band-designation wavelength in meters. You must write your own program, script, or batch file to do the necessary switching at your station." In the past version I never face that situation before. I've create an user_hardware.bat with only @Echo off inside of the file but still no change. Is this an already known issue ? 73s de Benjamin - F4FPR _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
