On 14/07/2020 13:58, Bensay 1 wrote:
Dear Devel List,
I actually face an issue with the most recent version of WSJT-X;
WSJT-X are set to use an Yaesu FT-991;
But at each band change with CAT it keep calling an non existant file :
user_hardware + band value.
I've read this on the WSJT-X doc :
"Depending on your station and antenna setup, band changes might require other
switching besides retuning your radio. To make this possible in an automated way,
whenever WSJT-X executes a successful band-change command to a CAT-controlled radio,
it looks for a file named user_hardware.bat, user_hardware.cmd, user_hardware.exe,
or user_hardware in the working directory. If one of these is found, WSJT-X tries to
execute the command
user_hardware nnn
In the above command nnn is the band-designation wavelength in meters. You must
write your own program, script, or batch file to do the necessary switching at your
station."
In the past version I never face that situation before.
I've create an user_hardware.bat with only @Echo off inside of the file but
still no change.
Is this an already known issue ?
73s de Benjamin - F4FPR
Hi Benjamin,
the issue yo are seeing is a known one, for WSPR band hopping I suggest
using WSJT-X v2.1.2 until the next release which repairs this defect.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
