Unless you have an Elecraft rig you really don't want any or very minimal ALC
to avoid harmonics. Zero ALC pretty much guarantees you won't be generating
harmonics.Most rigs can do very close to full power without showing ALC.
Two of us wrote a paper on how to set your audio which works on every rig it's
been used on. Elecraft rigs are the "oddball" that needs 4 bars or so of
ALC.You can typically get around 90% of the power setting on the rig without
ALC. So a 100W setting can usually do around 90W with zero ALC.
https://www.dropbox.com/s/1yztg5tzb48sa7m/FT8Noise7.pdf?dl=0
Mike W9MDB
On Sunday, September 6, 2020, 10:48:36 PM CDT, Adrian <[email protected]>
wrote:
Thanks Larry, I went with Bill's advice on the up/down button for 0.1dB
steps, which
is what I need to get my alc right where I want it for best signal Q.
However a per-band memory of setting would be very useful, and a number
representing the level
would mate well with that. I still request the feature for future
development I originally asked for,
but I do appreciate the extra info.
On 7/9/20 10:53 am, Larry B. via wsjt-devel wrote:
> Hi Adrian,
>
> I use the wheel on my mouse. It's set for three lines, so it moves
> the slider by 0.3 dB.
>
> 73 -- Larry -- W1DYJ
>
>
>
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
