Dear Bill, Sure, Radio is set to Yeasu FT-991. I’m on RX only situation for my yesterday test. I was on rx onto 630m band Band hopping was set but TX disabled and Tx % set to 0. After this band hopping was selected but doesn’t seem to be functional. I for try only push the Tune button and release it, then my band hopping RX only was ok; I can reproduce it easily if I close WSJT-X and then open it again same issue until I TX at least once (Tune or TX); Unusual isn’t it :) ?
73 de Benjamin L / F4FPR / AG5HQ Le 29 sept. 2020 à 02:47, Bill Somerville <g4...@classdesign.com> a écrit : On 29/09/2020 00:29, Bill Somerville wrote: On 29/09/2020 00:11, Bensay 1 wrote: Dear WSJT-X Devels, I just upgraded my WSJT-X version up to the 2.3.0-rc1; But unfortunately the band hopping seems to be defective; Is this a known issue ? Rig : FT-991 (Yaesu) Windows 10 pro Beelink computer. Cat is working well but Band hopping does not , and WSJT-X doesn’t display night / day / sunrise / sunset. Thanks for your next advice. 73 de Benjamin L / F4FPR - AG5HQ Hi Benjamin, thanks for the issue report, I can confirm this is a regression. It will be fixed for the next release. 73 Bill G4WJS. Hi Benjamin, I have changed my mind on this issue. I cannot reproduce it. What do you have selected for "Settings->Radio->Rig"? 73 Bill G4WJS. _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
