I have found a similar random seeming event but somewhat frequent. I use the Tune button with the power slider to create a variable level signal for my VHF+ power meter calibration and amplifier testing so I use it a lot at times. I find I turn tune on while in FT8 at random times for my test, don’t care about period, and it turns on but then immediately turns off. Have not nailed down the exact conditions yet as I am not usually looking at the screen, instead watching my meters and relays. Not double clicking. I happen to have the TX 1st button checked. I will uncheck it and watch.
It behaves like a single mouse event gets treated as a double click event. I also see this randomly with the Erase button. 1 click to clear the RX window and sometimes both windows clear. I am sure I did not double click but it is a wireless mouse and while other things seem to work as expected, who knows. Mike K7MDL EL87sm & CN88sf From: Al <k...@arrl.net> Sent: Tuesday, November 3, 2020 13:01 To: WSJT software development <wsjt-devel@lists.sourceforge.net> Subject: [wsjt-devel] RC1 Tune problem You may already have this one.. 1) With TX odd/1st selected and observe the TX audio out of WSJT... 2) at 3 seconds into the odd period, toggle TUNE on then off. 3) TX audio starts when TUNE is toggled on and then off briefly and then back on until the end of the period. AL, K0VM
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel