Someone I know has forked WSJT-X to get the tone sequence at the start of the TX cycle, which he then passes to a microcontroller embedded inside an FM radio, which is set up to change the frequency of the unmodulated FM carrier as per FT8 tones. RX is an RTL dongle. He makes contacts this way, so it works...
I guess I could ask him for the patch... On Mon, 21 Dec 2020 at 14:11, Tim Madden <tmad...@cfl.rr.com> wrote: > Would it be easiest for the software to have a port for UDP IQ data on > both RX and TX? > > Then we only need to add the operating frequency for the bottom of the > band to the software configuration for each UDP port number our station can > support. > > That would open the application to any operating frequency without the > need to provide updates. > > (that's how modern airborne radar works) > > > On 12/21/2020 12:25 AM, lstosk...@cox.net wrote: > > Seems foolish to build a whole SSB rig to convert the audio signal from > WSJT to RF when at low frequencies some direct synthesis should be > possible. Or am I dreaming? > > N0UU > > > _______________________________________________ > wsjt-devel mailing > listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
