Please build the current version...that should be fixed already...
https://github.com/Hamlib/Hamlib
Mike W9MDB
On Monday, January 11, 2021, 12:09:09 PM CST, Marco Calistri
<[email protected]> wrote:
Dears,
Despite I was confident that by using a "rolling distribution" like Tumbleweed
is, the frequent packages updates before or after could get to break some
functionalities of the system,
I've always been able to make the necessary little adjusts and corrections
which have resolved the malfunctions I faced so far.
But today I stuck on the apparent impossibility to make the WSJT-X/CQRLOG work
as usual by using the net hamlib rigctl and starting WSJT-X by the CQRLOG
control command.
Currently I only succeed to make WSJT-X working by hand launching the
following command:
/usr/bin/rigctld -m 1021 --vfo -r /dev/ttyUSB1 -p /dev/ttyUSB0 -t 4532 -s 4800
--set-conf=data_bits=8, stop_bits=2, serial_parity=None, serial_handshake=None,
dtr_state=OFF, rts_state=ON Then I start WSJT-X by the Start Menu using the
radio setting to use my RTX (Yaesu FT-100) since hamlib option does not work
anymore, and everything is working, CAT and PTT which are on separate
USB-to-Serial ports.
Despite it works I see an error message that I would like to share with this
list to see if somebody has already faced this error before:
Hamlib: rig_init: rig does not have rx_range!! Thanks for your kind attention
and for any eventual hints.
---
73 de Marco, PY1ZRJ (former IK5BCU)
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
