On 08/02/2021 18:50, Jim Jennings wrote:
Spent a couple hours on the phone last weekend with (my cousin) AC6CD,
trying to resolve a problem he has experienced with both v. 2.3.0 and
v. 2.4.0-RC1 while operating FT8. When he enables transmit in that
mode, the Enable TX is dropped at the end of the transmission,
requiring him to re-enable it for each subsequent one, and a Rig
Control Error box appears occasionally on his screen. He is running
the program under Windows 10, 64-bit, a SignaLink for his CODEC, and
his radio is a Yaesu FTDX3000 properly configured as such in his
settings. This occurs in both above versions, whether or not he has
JTAlert concurrently running on his system. The FTDX5000 radio
setting was tried and it yielded the same result.
He presently has versions 2.2.2, 2.3.0 and 2.4.0-RC1 installed in
separate WSJT\ subdirectories on his system. The above problem does
not occur with v.2.2.2. He did not try using any of the 2.3.0-RCs
prior to the GA release.
No problems have been encountered with either version at my station on
my IC-756ProIII or IC-7610.
73,
Jim W7XZ
Hi Jim,
what is the error message from WSJT-X, including the details.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
