Hi Bill, Why are you not open to such a solution? Would certainly help to increase the extremely small number of FST4 users. It takes too long to switch configurations.
But: I've already found a solution for myself. In my wsjt-x_improved versions, I have now programmed it so that the mode buttons automatically switch on the most common sub-mode (FST4-A60 or Q65-A30). Only needed two additional lines in the source code ... 73 de Uwe, DG2YCB Von: Bill Somerville [mailto:[email protected]] Gesendet: Dienstag, 16. Februar 2021 11:39 An: [email protected] Betreff: Re: [wsjt-devel] Please save the T/R sequence lengths for each mode separately On 16/02/2021 10:16, DG2YCB, Uwe wrote: Hi Bill, Please let wsjt-x save the T/R sequence lengths for each mode separately. Why? Because for FST4 on 160m, FST4-A60 seems to become something like a "standard", and for Q65 on 6m Q65-A30. But as wsjt-x currently saves only one T/R sequence lengths setting, each time the users have to change T/R sequence length when switching from FST4 to Q65 mode. It would help a lot when for FST4 and Q65 individual values are remembered. (And let FST4-A60 and Q65-A30 become the default settings when switching to "FST4" or "Q65", so that it is easier for less-experienced users to start with these new modes.) Only a very minor change, but a significant improvement. Thanks! 73 de Uwe, DG2YCB Hi Uwe, rather than undertake such a change I will recommend that you try using configurations to change mode, that way you can set the required T/R period along with other settings per mode, and even have multiple configurations for each mode you use, each with customized settings. 73 Bill G4WJS.
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
