It looks to me that's precisely why Configurations were created. Why reinvent the wheel?
People should learn to use configurations and they can then customize their ops in any way they like. I have 12 configs, every mode has its own config. No mistakes, no forgetting, no mis-setting. ...and no code bloat. 73, N0AN Hasan On Tue, Feb 16, 2021 at 6:39 AM Bill Somerville <[email protected]> wrote: > Uwe, > > your description of your amendment sounds different from what you are > asking for. If you have a version that switches to the T/R periods **you** > use with certain modes, then that is fine for you but it is definitely not > a general solution. if you have a general solution that you have tested for > all modes and usage scenarios then why not contribute a patch? > > 73 > Bill > G4WJS. > > On 16/02/2021 12:27, DG2YCB, Uwe wrote: > > Hi Bill, > > Why are you not open to such a solution? Would certainly help to increase > the extremely small number of FST4 users. It takes too long to switch > configurations. > > But: I've already found a solution for myself. In my wsjt-x_improved > versions, I have now programmed it so that the mode buttons automatically > switch on the most common sub-mode (FST4-A60 or Q65-A30). Only needed two > additional lines in the source code ... > > 73 de Uwe, DG2YCB > > > > *Von:* Bill Somerville [mailto:[email protected] > <[email protected]>] > *Gesendet:* Dienstag, 16. Februar 2021 11:39 > *An:* [email protected] > *Betreff:* Re: [wsjt-devel] Please save the T/R sequence lengths for each > mode separately > > > > On 16/02/2021 10:16, DG2YCB, Uwe wrote: > > Hi Bill, > > > > Please let wsjt-x save the T/R sequence lengths for each mode separately. > Why? Because for FST4 on 160m, FST4-A60 seems to become something like a > “standard”, and for Q65 on 6m Q65-A30. But as wsjt-x currently saves only > one T/R sequence lengths setting, each time the users have to change T/R > sequence length when switching from FST4 to Q65 mode. It would help a lot > when for FST4 and Q65 individual values are remembered. (And let FST4-A60 > and Q65-A30 become the default settings when switching to “FST4” or “Q65”, > so that it is easier for less-experienced users to start with these new > modes.) Only a very minor change, but a significant improvement. Thanks! > > > > 73 de Uwe, DG2YCB > > Hi Uwe, > > rather than undertake such a change I will recommend that you try using > configurations to change mode, that way you can set the required T/R period > along with other settings per mode, and even have multiple configurations > for each mode you use, each with customized settings. > > 73 > Bill > G4WJS. > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
