Neil, Fair enough. I was hesitant to use WSJT-X 2.4.0-rc2 because of the problems I encountered (which blew up a preamp).
Nevertheless, I just tried the FT8 mode on 2.4.0-rc2 and it appears to work fine. Thus, the problem seems to be isolated to Q65. No Hamlib here. 73, John WA1EAZ > On Mar 5, 2021, at 8:09 PM, Neil Zampella <ne...@techie.com> wrote: > > Why did you run the clone to test FT8 .. .wouldn't it be a better idea > to see if WSJT-X worked correctly, then reported the issue? Using the > clone does not give the same information as the WSJT-X RC versions often > have Hamlib updates that other programs don't. > > Neil, KN3ILZ > > On 3/5/2021 1:10 PM, John Stengrevics wrote: >> Hello, >> >> I had been using the previous version successfully on a MacBook Pro (Intel >> not M1), OS Big Sur 12.2.2. >> >> Today, I downloaded Mac version 2.4.0-rc2. >> >> When running Q65 on 6 meters, T/R = 30 seconds, Submode A, the program >> continues to transmit after the 30 second period is complete, for 60 seconds >> total. That is, PTT is active after 30 seconds but no output. >> >> I did follow the instructions in the Readme file. >> >> I have tried deleting 2.4.0-rc2 and re-downloading, with the same result. >> >> I have since tried JTDX FT8 to confirm there wasn’t an obvious problem with >> my transceiver (Elecraft K3S). I have confirmed that FT8 works normally. >> >> I would be most grateful for any suggestions. >> >> John >> WA1EAZ >> > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
