FWIW ... Hamlib is built-in to WSJT-X.
Neil, KN3ILZ
On 3/5/2021 9:23 PM, John Stengrevics wrote:
Neil,
Fair enough. I was hesitant to use WSJT-X 2.4.0-rc2 because of the problems I
encountered (which blew up a preamp).
Nevertheless, I just tried the FT8 mode on 2.4.0-rc2 and it appears to work
fine.
Thus, the problem seems to be isolated to Q65. No Hamlib here.
73,
John
WA1EAZ
On Mar 5, 2021, at 8:09 PM, Neil Zampella <ne...@techie.com> wrote:
Why did you run the clone to test FT8 .. .wouldn't it be a better idea
to see if WSJT-X worked correctly, then reported the issue? Using the
clone does not give the same information as the WSJT-X RC versions often
have Hamlib updates that other programs don't.
Neil, KN3ILZ
On 3/5/2021 1:10 PM, John Stengrevics wrote:
Hello,
I had been using the previous version successfully on a MacBook Pro (Intel not
M1), OS Big Sur 12.2.2.
Today, I downloaded Mac version 2.4.0-rc2.
When running Q65 on 6 meters, T/R = 30 seconds, Submode A, the program
continues to transmit after the 30 second period is complete, for 60 seconds
total. That is, PTT is active after 30 seconds but no output.
I did follow the instructions in the Readme file.
I have tried deleting 2.4.0-rc2 and re-downloading, with the same result.
I have since tried JTDX FT8 to confirm there wasn’t an obvious problem with my
transceiver (Elecraft K3S). I have confirmed that FT8 works normally.
I would be most grateful for any suggestions.
John
WA1EAZ
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
