Hi Mike,
Was running 2.4.0-rc3 tonight testing with another station We made some
contacts I was on RC1 and he was on rc2 on submode B. We both upgraded
to rc3. We decided to see what would happen on Submode C. I was on
T/R=15sec and left it there so the Tx Freq box turned red, no surprise
and I purposefully ignored it. On the first decode attempt I got this
error pop up detail.
Running: C:\WSJT\wsjtx\bin\jt9 -s "WSJT-X - K3-VHF" -w 1 -m 3 -e
C:\WSJT\wsjtx\bin -a "C:\Users\k7mdl\AppData\Local\WSJT-X - K3-VHF" -t
"C:\Users\k7mdl\AppData\Local\Temp\WSJT-X - K3-VHF"
At line 683 of file C:\Users\bill\src\k1jt\wsjtx\lib\qra\q65\q65.f90
Fortran runtime error: Index '-7' of dimension 1 of array 'spec' outside
of expected range (1:750)
Thanks for your report. Q65 submodes 15C, 30D, and 60E have total
bandwidths of 1733 Hz. TxFreq should be set low enough that the highest
tone fits within your Tx passband. This suggests setting TxFreq to well
below 1000 Hz. The recommended value is 700 Hz, and the TxFreq
background turns red (as a reminder) if you do not use that value.
The Fortran runtime error that you observed will be protected against in
the next release.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
