Hi all, I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300 via Win4Icom. Normally I run V2.2 of WSJT-X. I decided to update to WSJT-X 2.3 GA and found that my audio was not working on transmit. I confirmed all my drivers and settings were consistent to V2.2. I never have any issues with V2.2. It's rock solid. I found that if I clicked on tune in WSJT-X 2.3, I had audio, but I had to click transmit and halt multiple times to get the normal transmit audio to work. Once it started working, it was fine and I had no more issues until I shut down WSJT-X and restarted it. After restart, the issue was back. Now that I am on WSJT-X 2.4.0-rc3, it is exhibiting the same symptoms. I also have V2.2 loaded and confirmed that V2.2 still functions correctly. Reading another post, it had said that the VOX being on can cause this issue. I do not use VOX and validated that the VOX setting on the 7300 is turned off. Thank you, Craig Sharp ARS: N8PWM (EN82fn)
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
