Everybody that does that ends up with multiple ham installations and no idea
which libhamlib.so wsjtx is using.You can always install a package over the top
of it with no problem.
Mike W9MDB
On Tuesday, August 3, 2021, 08:18:41 AM CDT, Bill Somerville via wsjt-devel
<[email protected]> wrote:
Mike,
no, no, NO!
Do not set the install prefix to /usr, that is very poor advice. Install into
the default /usr/local prefix, that will override the system install without
screwing up the package managed packages from the distribution repositories.
73 Bill
G4WJS.
On 03/08/2021 13:51, Black Michael via wsjt-devel wrote:
The split problem should be fixed. Uninstall the hamlib you have now and
clone the master repo -- you'll have to compile it. Hamlib-4.3 should be
released this month.
git clone https://github.com/Hamlib/Hamlib.git cd Hamlib ./bootstrap
./configure --prefix=/usr make install
Mike W9MDB
On Tuesday, August 3, 2021, 05:45:15 AM CDT, Saku via wsjt-devel
<[email protected]> wrote:
Hi!
Just upgraded my Fedora from 33 to 34.
Removed all self compiled hamlib and wsjtx versions and installed packages
from repository:
wsjtx-2.4.0-1.fc34.x86_64
hamlib-4.1-1.fc34.x86_64
It seems to work. Only one question arises:
Is it in purpose that every time I start wsjtx it shows yellow "OOB" on red
background and frequency display is filled with zeros.
After band is selected frequency shows out ok and all works. Just annoying
that it does not get frequency at start by itself like before.
I use rigctrld started from script before wsjtx. Start line is:
/usr/bin/rigctld -m 3073 -r /dev/icom7300 -t 4532 -s 19200 -C
auto_power_on=0 &
(as you can see the rig is icom 7300)
Wsjtx settings use rig: Hamlib Net rigtcĺd, sever: localhost:4532, split: rig
ldd /usr/bin/wsjtx | grep ham
libhamlib.so.4 => /lib64/libhamlib.so.4 (0x00007fd30f59e000)
-------------------------------------
After that I installed 2.5.0_rc4 from wsjtx web page package:
wsjtx-2.5.0_rc4-1.x86_64
Again every time wsjtx is started it shows yellow/red "OOB" with zero
frequency. When band is selected from selector frequency shows ok.
But every time I try to "Tune" or start tx from "Enable TX" the yellow/red
"OOB" and zero frequency returns and TX does not start.
Also following error appears:
Hamlib error: Feature not available
rig.c(5605):rig_has_vfo_op return(0)
rig.c(3790):rig_set_split_freq return(-11)
rig.c(4331):rig_set_split_freq_mode return(-11) while setting split TX
frequency and mode
If I return band back from band selector same repeats. But If I ignore "OOB"
and try again "Tune" or "Enable TX" transmitter starts and I can keep qso. How
ever at logging phase the "Band" column is empty as can be expected when "OOB"
is visible.
Perhaps rig timeout is too short in wsjtx (??) and it can not get response from
daemon running rigctld that have to ask it from rig.
But from where to adjust that?
If I go configuration/radio and test CAT and PTT everything works ok.
So rc4 is unusable with "split"="rig". If I set "Fake it" all works after I
have cleared the start phase "OOB" like with 2.4.0
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
