On 25/08/2021 02:32, Peter Sumner via wsjt-devel wrote:
Hello,
  was curious if anyone has a way to use the IQ data available over USB-3 from the rear of an IC-7610 to feed into MAP65? I have the HDSDR software working with the ICOM supplied driver but as yet have not managed to get MAP65 to work with this source. With the new Q65 mode being spread across many regional frequencies on 50 MHz, it is getting harder to keep an eye on each of the frequencies but with the Q65 mode in MAP65 it might help me and others with this, plus be handy for 50 MHz EME when the moon has multiple Q65 QSO's in progress.

regards,
Peter Sumner, vk5pj

Hi Peter,

MAP65 requires either a single or dual I/Q feed via an audio device at 96,000 frames per second, or a Linrad compatible UDP feed of one or two I/Q data channels, also at 96,000 frames per second.

Icom provide some tools that can consume the IC-7610 single channel wide-band I/Q feed on the [USB 2] connector as an ExtIO library (MS Windows only) that can feed various SDR console applications. If one of those SDR console applications can decimate and output that at 96,000 frames per second to an audio device, then that would be compatible MAP65 in single polarization mode.

73
Bill
G4WJS.



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to