Hi Bill and Michael,
Thanks for the tips, but no luck !! That was one of the first things I did
!!
73s
Eddy

On Sat, 4 Sept 2021 at 20:36, Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> Hi Eddy,
>
> note also that the CAT baud rate must be 4800 when using the pass-thru CAT
> mode of that ATU.
>
> 73
> Bill
> G4WJS.
>
> On 04/09/2021 18:07, Black Michael via wsjt-devel wrote:
>
> Sounds like a baud rate mismatch.
>
> Mike W9MDB
>
>
>
>
> On Saturday, September 4, 2021, 10:54:59 AM CDT, Eddy Winrow via
> wsjt-devel <wsjt-devel@lists.sourceforge.net>
> <wsjt-devel@lists.sourceforge.net> wrote:
>
>
> Hello,
> I,m hoping you will be able help me.
>
> Equipment: FT897D microham USBIII, LDG AT897 Plus
>
> Problem: I have a Red Freqeuncy box and the OOB box is Red and shows
> constant OOB.
> when I try to select a Freq from the Dropdown box, shows the Freq selected
> in Black and yellow, jumps back to a Red Freq box with 18,477,765
> 567Mhz-Ghz ??
> I,ve tried everything that has been suggested !! I,m now pulling my hair
> out !!
>
> 73s and Greetings from Germany
> Eddy DF3DDY
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to