One of my stations on linux here uses this exact same setup. I have best results

running HRD as the rig select interface ( I run HRD under Crossover) I found the direct FT-897 rig selection unreliable.

4800 bps via the AT-897 plus. Manual full tune done on each band change before operation. Rig Split and DIG mode are used.

In Crossover the comport to ttyUSB alias is done in the bottle registry ; https://www.codeweavers.com/support/wiki/mac/mactutorial/usbtoserial2

vk4tux



On 5/9/21 4:53 am, Eddy Winrow via wsjt-devel wrote:
Hi Bill and Michael,
Thanks for the tips, but no luck !! That was one of the first things I did !!
73s
Eddy

On Sat, 4 Sept 2021 at 20:36, Bill Somerville via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net>> wrote:

    Hi Eddy,

    note also that the CAT baud rate must be 4800 when using the
    pass-thru CAT mode of that ATU.

    73
    Bill
    G4WJS.

    On 04/09/2021 18:07, Black Michael via wsjt-devel wrote:
    Sounds like a baud rate mismatch.

    Mike W9MDB




    On Saturday, September 4, 2021, 10:54:59 AM CDT, Eddy Winrow via
    wsjt-devel <wsjt-devel@lists.sourceforge.net>
    <mailto:wsjt-devel@lists.sourceforge.net> wrote:


    Hello,
    I,m hoping you will be able help me.

    Equipment: FT897D microham USBIII, LDG AT897 Plus

    Problem: I have a Red Freqeuncy box and the OOB box is Red and
    shows constant OOB.
    when I try to select a Freq from the Dropdown box, shows the Freq
    selected in Black and yellow, jumps back to a Red Freq box with
    18,477,765 567Mhz-Ghz ??
    I,ve tried everything that has been suggested !! I,m now pulling
    my hair out !!

    73s and Greetings from Germany
    Eddy DF3DDY


    _______________________________________________
    wsjt-devel mailing list
    wsjt-devel@lists.sourceforge.net
    <mailto:wsjt-devel@lists.sourceforge.net>
    https://lists.sourceforge.net/lists/listinfo/wsjt-devel
    <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to