On 15/10/2021 17:19, Bill Somerville via wsjt-devel wrote:
On 15/10/2021 16:57, Barry Jackson via wsjt-devel wrote:
On 15/10/2021 16:18, Black Michael wrote:
Since you're not getting any answer with hardware flow it sounds
like you have a 3-wire RS232 cable. So how are your cable pinouts
connected?
Try this
rigctld -v -Z -vvvvv -m 2003 -s 4800 -r /dev/ttyUSB0 -t 4532
--serial_handshake=None --write_delay=5
I tried as above but got:
rigctld: unrecognized option '--serial_handshake=None
So I did:
rigctld -v -Z -vvvvv -m 2003 -s 4800 -r /dev/ttyUSB0 -t 4532 -C
serial_handshake=None,write_delay=5
Output attached which is an improvement.
I then started wsjtx and results were not good, band switching failed
rather randomly - again attached.
Cheers,
Barry
G4MKT
Hi Barry and Mike,
the problem there seems pretty straightforward, Hamlib is attempting
an FT; query and the TS-450S/TS-690S only have the set version of that
command, no query version.
73
Bill
G4WJS.
Hi Mike,
further to the above, this seems to be due to a mangling of a
contribution by me back in 2016 to deal with a specific issue on the
Elecraft K2/K3 rigs. My original contribution was 0264e73.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
