I had a few minutes to do more investigation and I just can't get 2.5.0 (or 2.5.1) to work while 2.4.0 does.
Here's my observations: WSJT-X 2.5.1 / Hamlib master - FT-991 1. Radio does not immediately set split operation. 2. Using band dropdown or settings->Radio->Test CAT, OK starts split operation. 3. Test PTT does not work WSJT-X 2.5.1 / Hamlib master - Flrig 1. Frequently loses connection to Flrig 2. Test PTT works (but loses connection) 3. Does not set radio into split mode 4. Foring split from radio or Flrig causes connection loss until split is turned off. WSJT-X 2.5.0 / Hamlib 4.1 - Flrig 1. Radio does not immediately get set to split operation 2. Using band dropdown or settings->Radio->Test CAT, OK starts split operation but then loses connection or reverts to non-split. 3. Tune does not work (self cancels) 4. Test PTT does not work, causes loss of connection to flrig. WSJT-X 2.5.0 / Hamlib 4.1 - FT-991 1. Does not immediately set split operation. 2. Using band dropdown or settings->Radio->Test CAT, OK starts split operation. 3. Test PTT / Tune does not work. WSJT-X 2.4.0 / Hamlib 4.1 - FT-991 1. Does not immediately set split. 2. Otherwise appears to work normally. WSJT-X 2.4.0 / Hamlib 4.1 - Flrig 1. Does not immediately set split. 2. Otherwise appears to work normally. Thanks, Richard KF5OIM
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
