Hi All,
I've installed WSJT-X version 2.5.2 on my Win10 64-bit PC, working with a Funcube Pro+ receiver. I've used this receiver with previous versions of WSJT-X, up to and including 2.5.1 without any errors being shown. However, on running 2.5.2 whenever a frequency is selected on the main window drop-down list, or when the Monitor button is pressed from off to on, or if a change of decoder mode forces a frequency change, then a Rig Control error appears as: Hamlib error: Feature not available rig.c(2544):rig_get_mode return(0) rig_set_mode called, vfo=currVFO, mode=USB, width=-1 rig.c(2350):rig_set_mode return(-11) while setting current VFO mode Timestamp: 2021-11-06T12:07:36.463Z The workaround is merely two mouse clicks . press OK on the Rig Control error window then click on OK to exit the Settings window and this clears the error and everything works as normal until the user changes frequency (or the Mode changes the frequency) or the Monitor button is toggled off to on. The Rig Control status LED(?) on the main window always shows green. And the Test CAT button turns green on the Settings-->Radio tab, if pressed. Something has definitely changed regarding the Rig Control software in this 2.5.2 version as I had no issues in previous versions of 2.5.x If I can help you test the software with a Funcube Pro+ then please do not hesitate to contact me. 73 Chris (Shortwave Listener in UK)
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
