Saw post where Mike gave URL for new “libhamlib.dll”. Copied to the WSJT-x bin folder to replace older dll and if fixed the ANR switch to off problem I was seeing. Everything else I have tested in 2.5.2 now seems to work normally. Using Win10 Home-64.
2.5.2 installed dll create date 11/03/2021. Replacement dll create date 11/12/2021. > Begin forwarded message: > > From: Al Pawlowski <k6...@almont.com> > Subject: Re: wsjt-devel Digest, Vol 93, Issue 25 > Date: November 11, 2021 at 07:50:03 PST > To: WSJT software development <wsjt-devel@lists.sourceforge.net> > > The VAC sound problem seems to be gone now - been working for two days fine. > The ANF to off problem is the same - BTW, when I wrote switching, I meant it > goes to off when on transmit and stays there until manually set back to on. > > I just switched back to 2.5.1 and the ANF -> off problem does not occur - > does appear to be a 2.5.2 (maybe CAT hamlib) problem. Of course, now I have > the main window not remembering its previous size problem, which is fixed in > 2.5.2 - for me at least. > >> Date: Tue, 9 Nov 2021 14:43:53 -0800 >> From: Al Pawlowski <k6...@almont.com <mailto:k6...@almont.com>> >> To: WSJT software development <wsjt-devel@lists.sourceforge.net >> <mailto:wsjt-devel@lists.sourceforge.net>> >> Subject: Re: [wsjt-devel] WSJT-x 2.5.2 Bug >> Message-ID: <fe5c9a1d-95d0-4e11-b6f8-ec417aafb...@almont.com >> <mailto:fe5c9a1d-95d0-4e11-b6f8-ec417aafb...@almont.com>> >> Content-Type: text/plain; charset=us-ascii >> >> Recently noticed that WSJTx GA 2.5.2 Win64 will switch my HPSDR Thetis >> v2.8.11 ANF button to off when WSJTx does a transmit. I had not seen this on >> 2.5.1 or earlier versions of WSJT-x and have been using Thetis 2.8.11 for >> quite awhile. I run Win10 Home 64bit with auto updates on. ANF is pretty >> useful on digital modes so this is kind of an annoying problem. Maybe an >> unintended change in the CAT lib working for PowerSDR. >> >> I normally run with the WSJT-x radio split operation set to Rig. If I set it >> to Fake It, the ANF function switching stops, turn it back to Rig and it >> starts switching ANF on xmit again - very repeatable. >> >> I also had WSJTx 2.5.2 fail to connect to my VAC rx sound channel. I updated >> my VAC drivers to current version (4.66) from 4.64 and played with the >> windows sound device settings some and this problem seems to have gone away. >> I did not change any sound device settings when upgrading from WSJTx 2.5.1 >> which was working fine. It did not seem to me the VAC update is what fixed >> the problem, more like me playing with the sound device properties. Seems >> like there has been a WSJTx 2.5.2 sound changed or a Win update got me. >> Hopefully, this problem will stay fixed. >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
