No.
There is no scheduled date for the next release.
Mike W9MDB
On Wednesday, December 1, 2021, 11:25:58 PM CST, Dave J Barnes via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
So a new version of wsjtx is coming in a few days?
On 12/1/21 10:49 PM, Black Michael via wsjt-devel wrote:
You should be able to build it yourself from the tar.gz file.
Just be sure to remove the hamlib package you already have installed as it
installs in /usr/local
Or you can configure it this way
./configure --prefix=/usr
Mike W9MDB
On Wednesday, December 1, 2021, 10:24:03 PM CST, Dave J Barnes via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Any help for Linux users?
On 12/1/21 10:16 PM, Black Michael via wsjt-devel wrote:
Please try the latest dll. This version is due to be 4.4 to be released
in the next few days.
New hamlib for Windows installation directions #1 Shut down WSJTX #2
Download either the 32-bit or 64-bit DLL -- hopefully your browser doesn't
block it but may warn you multiple times. If you can do a "Save As" you can
save it directly in \WSJT\WSJTX\bin and replace the libhamlib-4.dll that is
there. http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll
http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll #3 If you don't save
directly you need to open a file browser and move the file that way. If you're
not familiar with that here's a video on the file browser.
https://www.youtube.com/watch?v=AyVqCJrs9dk
Mike W9MDB
On Wednesday, December 1, 2021, 09:29:38 PM CST, Dave J Barnes via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
I looked through the archives but I don't see any resolution to the rig
control issues with using split on the TS-450. Split is broken on the
K3 too. The only setting that works is "fake it". Using "rig" for split
on the K3 will try to adjust the tx frequency to keep the tones in the
passband but then quickly changes back to the receive frequency thus
transmitting on the wrong frequency. I believe this bug is why the
middle of the FT8 segment stays crowded. It used to work. I verified
that 2.40 works as I remember -- "rig" split mode keeps the tx frequency
adjusted for the passband. Is there an additional setting I need?
wsjtx 2.5.2 Linux 64 bit Ubuntu 20.04
djb WB4KDI
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
