Hi!
OS Fedora 35
rig Icom ic 7300
Hamlib self compiled
Hamlib 4.5~git ti joulu 14 22:54:46 2021 +0000 SHA=db3837
Wsjtx self compiled
WSJT-X v2.5.3 69f9ec-dirty
Hamlib started from script:
rigctld -m 3073 -r /dev/icom7300 -t 4532 -s 19200 -C auto_power_on=0
--vfo &
Wsjtx settings:
Hamlib NET rigctl / 127.0.0.1:4532 / PTT CAT / Mode DATA/Pkt / Split Rig
-------------
Noticed just that if VFO B has been used for any other mode than USB-D
Wsjtx will not change the mode when it starts transmitting.
When band is changed from selector VFO A goes to that band:
When QSO or CQ is started, or Tune pressed, VFO B is activated and set
to same band, but VFO B mode is not touched.
It must be set manually from rig panel.
Easily reproduced. Closing Wsjtx or switching bands does not make any
difference.
--------------
Another problem, but hard to reproduce, is that randomly the RX VFOA
takes frequency from recently used in TX VFOB.
So RX jumps to frequency that was used while transmitting.
This does not happen always and so far I have not found any procedure to
make it happen every time.
User just must be aware of that and quickly reset RX frequency back with
band selector.
This problem exists also with v2.5.2
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
