Hi Ton,
The crash you observed is caused by setting Rx frequency to a value so
high that the highest tone of the mode in use would be above 5000 Hz.
In general, WSJT-X is designed to work with maximum Rx passbands up to
5000 Hz, but not beyond. Best to stay within that limit.
-- 73, Joe, K1JT
On 12/20/2021 4:48 PM, Ton PA0TBR via wsjt-devel wrote:
When the Rx frequency is set above 4500 Hz then WSJT-X gives a
Subprocess error 2 at t = hh:mm:56.
I can repeat this when I click the waterfall above 4500 Hz or set the Rx
frequency above 4500 Hz.
I could not repeat this behaviour in FT8.
I run WSJT-X v2.5.3 with the Q65 (60C) decoder (in 3 instances).
The receiver bandwidth in the Advanced settings is set to 5000 Hz.
The details are:
Running: C:\WSJT\wsjtx\bin\jt9 -s "WSJT-X - ANAN-100D-B" -w 1 -m 3 -e
C:\WSJT\wsjtx\bin -a "C:\Users\Ton\AppData\Local\WSJT-X - ANAN-100D-B"
-t "C:\Users\Ton\AppData\Local\Temp\WSJT-X - ANAN-100D-B"
At line 150 of file C:\Users\joe\src\bitbucket.org
<http://bitbucket.org>\k1jt\wsjtx\lib\qra\q65\q65.f90
Fortran runtime error: Index '3100' of dimension 1 of array 's1' outside
of expected range (3000:1)
Error termination. Backtrace:
Could not print backtrace: libbacktrace could not find executable to open
#0 0xffffffff
#1 0xffffffff
#2 0xffffffff
#3 0xffffffff
#4 0xffffffff
#5 0xffffffff
#6 0xffffffff
#7 0xffffffff
#8 0xffffffff
#9 0xffffffff
#10 0xffffffff
#11 0xffffffff
#12 0xffffffff
#13 0xffffffff
Please let me know if I can be of help by collecting more info.
73,
Ton pa0tbr
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
