This guy is also using CAT ptt and using rear data port audio as I do ;
https://km1ndy.com/how-to-program-yaesu-ft857d-for-ft8-and-wsjtx/
On 11/7/22 00:22, Nigel Haynes via wsjt-devel wrote:
I have been using the WSJT-X 2.6.0-rc1 without issue on several rigs,
but when I tried to setup an FT-857 for rig control, I was having
errors. I am using a signalink for sound, so need to select VOX in the
settings. When selecting VOX, it gives an error when connecting via
Test CAT. If I select CAT PTT, everything works (except it doesn’t
because the rig wants audio via the mic and not the cat port on the
rear where the signalink is sending the audio.) I installed the latest
production release, 2.5.4, and everything is good.
As a test, I have it working on 2.5.4, then installed WSJT-X 2.6.0-rc1
and launched the same shortcut, and get the error. I then reinstalled
2.5.4 and it works as expected. The rig also switches from VFOA to
VFOB and back a few times before the error.
Recap:
WSJT-X 2.6.0-rc1 has an issue on the FT-857 rig control and will not
connect when VOX PTT is selected. It connects (rig control) with CAT
PTT, but need to use VOX.
Thanks,
Nigel Haynes
supernigel.hay...@gmail.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
