I've had three segfaults on rc4.

One when I had just started up, another after I had been running for a
little while, and a third when I clicked the "menus" button.  No other
correlation that I could find. I didn't find a "core" file.

On Sun, Sep 18, 2022 at 10:32 PM Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> About how long were you running when this happened?
>
> I also had a segfault when WSJTX was just decoding but it was probably 20
> hours of runtime.
>
> Mike W9MDB
>
>
>
>
> On Sunday, September 18, 2022 at 08:49:23 PM CDT, Gary McDuffie via
> wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
>
>
> I seldom report problems that I might have because I don’t usually have
> enough notes on all the details, but this one seemed serious enough that
> I’ll tell you what I know about it.  Can I duplicate?  Of course not, yet.
> I’ve been using RC4 since it came out, so it's likely a one-off event.
> I’ve not had previous problems.
>
> I was on 17M FT8, made a few contacts with no problem.  After the last one
> logged, I hit the FT4 button and jumped up the band as I frequently do when
> things are busy.  I worked one station on FT8 and logged it.  After it
> logged, the program simply closed itself - gone.
>
> When I tried to restart WSJT-X, it failed, giving me the following error:
>     Sub Process Error
>     Failed to close orphaned jt9 process
> I am very familiar with the jt9 task error, and haven’t had one for a long
> time, but I think this is the first time I’ve had the process error.
> WXJT-X did not load.  When I clicked on the error to close it, it was
> replaced by a second one that said simply:
>     Fatal error
>     Sub-process error
> Acknowledging that one closed the error message & it went away.
>
> Any time I tried to repeat the reloading of WSJT-X, the same errors popped
> up.  In order to get it back up and running, I had to reboot the system
> entirely.  It seems to be running smoothly since then, as it had before.  I
> suspect everything is fine and this was just a glitch.
>
> Gary - AG0N
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
--w8lvn--
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to