Yes this was done. Restarted. And no change for MY issue. It’s an audio issue – not a USB issue IMO.
No issue with CAT control. WSJT-X always hears the radio, but the PC output to the radio jumps away from the chosen output of WSJT-X and needs resetting constantly. Alan McDonald Worimi Country 0413 657 427 From: Mark Bailey <k...@comcast.net> Sent: Wednesday, 23 November 2022 9:58 PM To: WSJT software development <wsjt-devel@lists.sourceforge.net>; Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net>; 'WSJT software development' <wsjt-devel@lists.sourceforge.net> Cc: Alan McDonald <a...@meta.com.au> Subject: Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue This setting is available on a "mains-powered PC. It causes problems if left in the default state: Go to Power Options > Change Plan Settings > Change advanced power settings. Find USB Settings, then drill down to USB selective suspend setting. Disable the options next to On battery and Plugged in, then click Apply. You must then restart your PC to stop it from turning off the USB ports unnecessarily." 73, Mark, KD4D On November 22, 2022 5:49:55 PM EST, Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > wrote: I'm not using a laptop with a battery. These settings, as you describe, are not available on a mains power PC Alan McDonald Worimi Country 0413 657 427 -----Original Message----- From: Glenn Williams via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Sent: Wednesday, 23 November 2022 12:12 AM To: wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> Cc: Glenn Williams <a...@alumni.caltech.edu <mailto:a...@alumni.caltech.edu> > Subject: Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue I thought I remembered something about USB ports. I googled: "windows 10 USB ports randomly stop working" and got "Go to Power Options > Change Plan Settings > Change advanced power settings. Find USB Settings, then drill down to USB selective suspend setting. Disable the options next to On battery and Plugged in, then click Apply. You must then restart your PC to stop it from turning off the USB ports unnecessarily." ---Glenn, AF8C On 11/22/2022 1:27 AM, Alan McDonald via wsjt-devel wrote: OK so I’ve been running standard V2.5.4, IC-7300 on COM6 I have made further observations. I have all the devices I can find set to not sleep. After leaving WSJT-X running for a while, I often come back to find it won’t transmit. It is still decoding fine. (as reported before using the HamRadioDeluxe radio) I tried quite a few things to make it come back to Txing other than exit/restart cycling. I have found that going to Settings|Audio|Output and selecting something other than (3-USB etc) e.g. Then re-selecting 3_USB My tx comes back into operation. I also tried moving my USB cable over to another port on the PC but this makes no difference other than changin from say 2-USB to 3-USB etc. Alan McDonald Worimi Country -- This email has been checked for viruses by Avast antivirus software. www.avast.com <http://www.avast.com> _____ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _____ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
