I thought I remembered something about USB ports.
I googled: "windows 10 USB ports randomly stop working"
and got
"Go to Power Options > Change Plan Settings > Change advanced power
settings. Find USB Settings, then drill down to USB selective suspend
setting. Disable the options next to On battery and Plugged in, then
click Apply. You must then restart your PC to stop it from turning off
the USB ports unnecessarily."
---Glenn, AF8C
On 11/22/2022 1:27 AM, Alan McDonald via wsjt-devel wrote:
OK so I’ve been running standard V2.5.4, IC-7300 on COM6
I have made further observations.
I have all the devices I can find set to not sleep.
After leaving WSJT-X running for a while, I often come back to find it
won’t transmit. It is still decoding fine.
(as reported before using the HamRadioDeluxe radio)
I tried quite a few things to make it come back to Txing other than
exit/restart cycling.
I have found that going to Settings|Audio|Output and selecting something
other than (3-USB etc) e.g.
Then re-selecting 3_USB
My tx comes back into operation.
I also tried moving my USB cable over to another port on the PC but this
makes no difference other than changin from say 2-USB to 3-USB etc.
Alan McDonald
Worimi Country
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
